Luxury 4 Beds Room modern prefab house outdoor mobile prefabricated house australia with Kitchen and Bathroom
Product Description
1.Product Description
It's a form of newly architecture using high strength steel columns and beams as structural element, and fireproof sandwich panels as roof and wall. The use of prefabricated steel structure and sandwich panel as building material has grown in popularity over the past tens years due to their inherent strength, fireproof and soundproof, wide availability, and relatively low expense. Homes have also been built with this prefab container because they are seen as more eco-friendly than traditional building materials such as brick and cement.
it can also be disassembled and re-assembled times easily, the architecture is easily transported for they can be flat packed, after well packing, it will take very small space.
2.Characters
1) Good ability to assemble and disassemble for several times without damage.
2) Could be lifted, fixed and combined freely.
3) Fireproof and waterproof.
4) Cost saving and convenient transportation (Each 4 container houses can loaded in one standard container)
5) Service life can reach up to 15 - 20 years
6) We can provide the service of installation, supervision and training by extra.
3.Specification
| Item |
Specification |
| Part 1 |
Roof System |
| I. |
Steel frame |
Steel frame is Q235 galvanized fitting; |
| Ii. |
Roof insulation |
Ceiling is blue color steel pre-coated 0.4mm outside strong steel sheet;
With 50mm glass wool insulation material; |
| Iii. |
Roof ceiling |
Ceiling is shaped steel plate with different pattern |
| Part 2 |
Floor System |
| I. |
Steel frame |
3mm Galvanized Steel for main structure + 1.5mm square tube for secondary beam |
| Ii. |
Floor |
15mm chipboard + PVC leather floor |
| Part 3 |
Column System |
| I |
Column |
2.5mm Shaped Galvanized Steel |
| Part 4 |
Sandwich Wall System |
| I |
Wall Panel |
50mm EPS Foam Sandwich Panel ;
Outside color is light silver gray (0.35mm thickness steel );
Inside is white color steel (0.35mm thickness steel ). |
| Part 5 |
Door & window system |
| I. |
Door |
Material:Steel door
Size:2000*980mm(H*W) |
| Ii. |
Window |
Material:Aluminum alloy steel double hollow glass sliding window (including screens)
Size:1200*1000mm(H*W) |
| Part 6 |
Electric system |
| I. |
Electric system |
Includes ordinary LED light, A-SW double sockets 2set, A-SW air-switch 2 set,
Electrical box with safety protection device connecting cable for connecting; |
| Part 7 |
Accessories |
Electric wire;Sealant;Wiring tube;Screws and other accessories. |
4.Expandable container house with mobile platform (Can Be Customized)
5.PROJECT SHOW
6.Starand Container Units Show (Can Be Customized)
A.Construction process
Modular components are typically constructed indoors on assembly lines. Modules' construction may take as little as ten days but more often one to three months. Completed modules are transported to the building site and assembled by a crane. Placement of the modules may take from several hours to several days.
7.High quality materials
8.Packaging & Shipping
Company Introduction
Zhengzhou Angde Machinery Co., Ltd. Is located in Zhengzhou City, Henan Province. Our company is an integrated light steel construction company.
We provide consultant, design, manufacture, installation and one-stop service. Our products include flat pack container house, detachable container house, expandable container house, movable washing room,single and double K type house, Light steel structure plant ,etc. In addition, we also offer galvanized steel , color steel tile, rock wool (glass fiber wool) sandwich panel, EPS panel construction materials. During the epidemic, we have accumulated rich experience in the construction of temporary medical emergency and isolation housing and other activity rooms. Our company adheres to the purpose of green environmental protection, high efficiency and energy saving. We provide a full range of services for global customers. So you'll meet our DOSTON container house in Asia, Europe, and Africa
FAQ
1. Do you provide on-site installation service?
We provide very detailed installation instrution drawings and videos for every project. For large projects, we will have both installation workers and supervisiors on site. The fee for the on-site service should be negotiated with clients.
2.What's your delivery time?
Normally, delivery time is 15 days after deposit received. For large order, the delivery time should be negotiated.
3.How to control the quality of your product?
a. quality of the design: think about possible problems in advance and provide a high-quality design solution.
b. quality of the raw material: choose the qualified raw material
c. quality of the production:precise manufacturing technique, experienced workers, strict quality inspection.
4. How to deal with quality problems?
Warranty is 1 years. Within the warranty period, we will responsible for all quality problems caused by our production.
5. If there is a clear service life of your products? If have, how long?
Under conventional climate and environment, the service life of container house steel frame is 20 years
6. What designs do you have in different climates (How can the products adopt to different climates)?
Strong wind region: improve the wind-resisting ability of the internal structure.
Cold region: increase the thickness of the wall, or use good insulation material, improve anti-pressure ability of the structure.
High corrosion region: use corrosion resistant material, or paint anticorrosive coating.
website
https://angde2021.en.made-in-china.com/
Audited Supplier 
){kind=link}